Sper-scientific 800002 Infrared IR Thermometer Manual de usuario descargar pdf (Pagina 3)

10

RS232 SERIAL INTERFACE

This instrument works with the Sper

Scientific Intelligent Software and the RS232

serial connection to output data directly to

your computer. You can also use it with

other software using the RS232 output via

3.5 mm terminal (Fig1-14). The connector

output is a 16 digit data stream which can be

utilized by the user’s specific needs.

A RS232 cable (Sper Scientific 840055) or

equivalent is required to link the meter to the

PC serial port. The cable must have a 3.5

mm jack plug and a 9 pin connector where

the center pin equals Pin 2 and the Ground/

Shield equals Pin 5. The 16 digit data

stream is displayed in the format:

Each digit indicates the following status:

D15D14D13D12D11D10D9D8D7D6D5D4D2D1D0

D0 End Word

D1 to D4 Upper Display Reading, D1=LSD, D4=MSD

D5 to D8 D5=? D6=? D7=? D8=?

D9 Decimal Point (DP) for display

0=No DP, 1=1DP, 2=2DP, 3=3DP

D10 D10=0

Enunciator for Upper Display

01=°C, 02=°F

D13 D13=0

D14 Reading Polarity for the Display

0=Display value is “+”

1=Display value is “-”

D15 Start Word

D11&D12

3

FEATURES

• Very useful for measuring the surface

temperature of small and narrow spot

targets, such as IC, transistors, coils,

and transformers

• Wide range measurement from –10°C to

300°C (14°F to 572°F)

• 0.1°C and F minimum resolution

• Emissivity adjustment from 0.10 to 0.95

• Removable probe, easy operation, and

remote measurement

• Large LCD display

• Minimum and maximum recordings with

recall

• Data hold function

• RS232 serial interface for use with your

computer and software such as

Sper Scientific Intelligent Software

850050.

1 2 3 4 5 6

Comentarios a estos manuales

Sin comentarios