Sper-scientific 800102 Infrared IR Thermometer 8:1 Manual de usuario descargar pdf (Pagina 5)

4. BATTERY REPLACEMENT

• Replace the battery when the Low Battery Indicator (5)

is displayed.

• Open the battery cover, install a fresh 9V battery and

close the cover. Battery life expectancy is 16 hours.

5. MEASURING PROCEDURE

• Point the IR Gun at the object to be measured.

• Pull and hold the TRIGGER (1) to obtain a continually

updated temperature until the trigger is released.

"SCAN" (9) flashes on the display.

• Press the °C/°F BUTTON (8) to switch temperature

units.

• Press the LASER ON/OFF BUTTON (11) to turn the

LASER GUIDE (2) on or off.

• Release the TRIGGER (1) and last temperature reading

is displayed for approximately 6 seconds before turning

off. "HOLD" (9) is displayed.

6. CLEANING

Clean the lens with compressed air, use a soft brush, or

carefully wipe the surface with a moist cotton swab. Do not

use solvents on the lens. The housing may be cleaned

with mild soapy water on a cloth or sponge.

1 2 3 4 5 6 7 8

Sin comentarios

Sper-scientific 800102 Infrared IR Thermometer 8:1 Manual de usuario Pagina 5