Sper-scientific 850037 Large Display Conductivity Pen Manual de usuario descargar pdf (Pagina 17)

5. Rinse the probe tip with de-ionized or

distilled water before use to remove

any impurities adhering to the probe. If

the probe tip is dehydrated, soak it for

30 minutes to prevent contaminants

from slowing down the measurement

and accuracy.

6. Immerse the probe tip completely into

the sample. Ensure that there are no

air bubbles trapped in the probe slot.

Gently stir the probe to remove air

bubbles, ensuring that the probe tip

is submerged while stirring.

7. Stir the probe gently to create a uniform

sample. Wait about 15 minutes for the

reading to stabilize.

8. The unit of measure will ash on the

LCD to indicate that the pen is in

Measurement Mode. When the

reading is stable, the unit of measure

will stop ashing.

Hold Function

1. Press HLD to freeze the current

readings on the display. “Hold” will

appear on the LCD.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 55 56

Sin comentarios

Sper-scientific 850037 Large Display Conductivity Pen Manual de usuario Pagina 17