Sper-scientific 850023 Anemometer SD Card Logger Manual de usuario descargar pdf (Pagina 16)

MEASUREMENT PROCEDURES

Air Velocity and Air Temperature

1. Press POWER to turn the meter on.

2. Plug the anemometer probe plug into the anemometer

probe input socket.

3. Press and hold FUNC to cycle through the options until

“An” appears on the LCD. Release the FUNC button.

4. Hold the probe handle and point the probe head toward

the air flow. The air velocity value appears on the upper

display and the air temperature value appears on the

lower display.

Note

Point the yellow dot indicator on the probe head toward the

air flow.

Type K/J Thermometer

1. Press POWER to turn the meter on.

2. Press and hold FUNC to cycle through the options until

“tP” appears on the LCD. Release the FUNC button.

3. The anemometer probe must be disconnected from the

meter to obtain accurate Type K/J readings.

4. Plug a thermocouple temperature probe (type K or J)

into the type K/J thermometer socket. The LCD will

display the measurement value from the temperature

probe.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

Sin comentarios

Sper-scientific 850023 Anemometer SD Card Logger Manual de usuario Pagina 16