Sper-scientific 850023 Anemometer SD Card Logger Manual de usuario descargar pdf (Pagina 17)

MEASUREMENT PROCEDURES

5. “K” or “J” appear on the LCD to indicate the type of

thermometer.

Note

When using the meter for the first time, the meter will

default to K type thermocouple. See page 13 for

instructions on selecting the thermocouple type.

Hold Function

1. When measuring any parameter, press HOLD to freeze

the reading on the display. “HOLD” will appear on the

LCD.

2. Press HOLD again to release the hold function. “HOLD”

will disappear from the LCD.

Maximum and Minimum

To record maximum and minimum readings:

1. When measuring any parameter, press REC to begin

recording the maximum and minimum values. “REC”

appears on the LCD.

2. Press REC. The maximum value and “REC MAX” will

appear on the LCD.

3. Press REC. The minimum value and “REC MIN” will

appear on the LCD.

4. To delete the maximum or minimum value, press HOLD.

“REC” appears on the LCD and the meter will begin

recording the maximum and minimum values again.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 31 32

Sin comentarios

Sper-scientific 850023 Anemometer SD Card Logger Manual de usuario Pagina 17